The last time when you press the power button of your laptop, it did not turn on, did it? You thought that your laptop had been retired on an untimely death. But you got a little bit of calmness when you felt that your laptop had got power. Then, what could be the reason that my laptop won’t turn on but has power?
The aforementioned is a technical hiccup holding back your laptop from the boot and turning it on. So, do not worry about it. After you read the article, you will know how to assess the issue and how to fix it!
Why My Laptop Won’t Turn On But Has Power:
You already knew that it is a technical fault. There could be many possible reasons for its cause. You need to spend some time troubleshooting the cause of the problem. Pressing the power button several times, trying different power cables, and getting frustrated is not a solution. Consider looking for the actual cause of the issue.
Let’s say your laptop might have a faulty power supply, or the hardware may fail to operate. The other possible reason could be the age of your laptop. Think about it! If your laptop is old enough, do not spend money on replacing the expensive hardware. Instead, buy a new laptop.
One of the widely occurred causes of the issue is residual electricity. Residual electricity is the extra amount of electricity on the motherboard of a laptop can have. It is the security system integrated into many modern-day electrical devices to avoid the overloading of electricity. You may find this annoying, but it is suitable for your laptop, and you can fix it.
But, before you visit a laptop and computer specialist, why not try these fixing remedies that might help you. Here they are:
How To Fix It?
Now is the time to clear the question that hit your mind, Why My laptop won’t turn on but has power? You will know few solutions that will help you in fixing the issue. Here they are:
#1. Connect An AC Adapter:
If the power supply of your laptop is not functional, you can face such issues. The laptops are using battery power only. If you connect the power cable of an AC adapter to your laptop, it can run smoothly. But make sure that you plugged in the adapter cord correctly.
If your laptop is running fine by connecting an AC adapter to it, the problem is with your laptop’s battery. Your laptop’s power supply is OK. Replace the battery!
#2. Diagnose Your Laptop’s Screen:
There is no issue with your power supply, then let’s diagnose the screen of your laptop. First, you need to disconnect any external peripheral devices connected to your laptop. It is to make sure that they are not interacting with the boot process of your laptop.
The next step is to observe if your laptop has fans functioning, but you cannot see any image. Then turn off the lights and observe more attentively. This time if you saw a weak and faint image while in the dark, then the inverter of your laptop screen has been failed. You need to replace it. It will work again.
What if your laptop starts up, but it is not showing any image? The reason is the LCD panels that have been broken. You can fix it, but the process is technical. Try to consult a technician or replace the screen.
#3. Fixing BIOS:
Your laptop may be stuck. What does it mean? Sometimes, you have inserted a removable storage device. It interferes with the BIOS of your laptop. Your laptop tries to boot up from those devices instead of the normal boot. That can result in a start-up issue.
When you remove all other devices before turning on your laptop, you won’t face this issue anymore.
#4. Boot Your Laptop in Safe Mode:
Your laptop might have found new programs that it can’t handle. Therefore, it is encountering the issue at the start-up. Also, your current original user account may have been corrupted. That is causing the issue with your laptop.
Video: YouTube/Techddictive
When you boot your laptop in a safe mood, it will work. With a safe mood, you can uninstall those new programs you doubt could cause the issue. Also, you can create a new user account. Doing so will solve the complication of your laptop.
#5. Restarting the Laptop:
Properly restarting your laptop can help it drain off the extra residual electricity. It is the residual electricity that causes this issue most of the time. So, if your laptop is free from residual electricity, you won’t face any relevant issues.
Here is a step-by-step guide on how to restart your laptop fitly. Let’s get started:
- First, plug the power cable out of your laptop
- Then, remove the battery
- Press and hold the power button for 30 seconds
- Put the battery again and power up your laptop
- Give it a restart, and it is free of residual electricity.
The purpose of doing this activity is to consume the surplus amount of electricity that a laptop has. If you remove the battery and power cables from your laptop, the sources of electricity are removed, now it consumes all the power in it. Therefore, your laptop has no extra electricity to interrupt the boot process.
Conclusion:
Though it is evident that laptops have changed the game of technology, some issues still tease laptop users. One of them is when your laptop won’t turn on, but it has power. You can fix this issue simply by eradicating the causes of the issue. Following the steps that you have read above will ease the game for you. Here’s a quick recap:
- Look after the power supply by connecting it to the AC adapter.
- Check out your laptop’s screen. It could be the widely occurred reason.
- Remove all the external devices to make sure that the BIOS of your computer is not disturbed.
- Choose the safe mode for uninstalling the corrupted and harmful programs.
- Last but not least, subtly restart your laptop to drain out the residual electricity that does not allow your laptop to boot.
These are the best tips that will solve the problem and let you use your laptop in the usual manner. Enjoy!
FAQs:
Why is my laptop not starting?
It is because of the residual electricity. You need to drain the laptop of electricity by disconnecting the AC adapter and removing the battery. Then, hold the power button for few seconds, mostly 30 seconds. Plug the AC adapter back into the laptop without replacing the battery. It will start working.
Why did my laptop turn off suddenly and not turn back on?
When your laptop turns off and doesn’t turn on back, it is because of the fault in the power cord. You can check it out by connecting it to the multimeter. The multimeter will sound BEEP, which means your power cord is fine but in other cases, your power cord is dead. The best solution is to replace your power cord.
